Pinch Valves

V800 Series Pneumatic Pinch Valves

Size Range,
Threaded 1/2"– 2"
Flanged DN40 - DN250
Working Pressure,
Max 6 bar (Δp 1.5 bar)
Working Temperature,
Max +80 ºC



V800 Series Pneumatic Pinch Valves

Available in sizes ranging from DN40 to DN250. Valve body serves as a built-in actuator,eliminating the need for use of costly actuators. 
Ideally suited to be used as a shut-off or throttling valve mainly in mining,chemical,waste/water treatment and conveying applications involving abrasive or corrosive slurries,powders,chemicals,coarse particles or fibrous substances.
Offerred in "Normally Open" or "Normally Closed" configurations,requires only a 3/2 way or a pilot operated control valve. Designed to allow quick and easy sleeve replacement thus reducing maintenance costs.
Leak free performance in both direction even on trapped solids. In order to ensure tight closure,air supply to close the valve must be approximately 1,5 bar higher than line pressure.

Technicial Specifications


Document Name Document Language Document Size Document Link
V800 Series Pneumatic Pinch Valves CatalogueENG137.33 Kb